| Del nr | Tillverkare | Ansökan |
|---|
| MAX353MJE | MaximIC | Precision, quad, SPST analog switch |
| MAX6306UK47D2-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 4.583(min),4.818(max) Nominal timeout period 20ms. |
| MX7225KN | MaximIC | CMOS quad 8-bit D/A converter with double-buffered logic inputs. Error +-2 LSB. |
| MAX4610C/D | MaximIC | Low-voltage, quad, SPST, CMOS analog switches (four NO switches). |
| MAX5541CSA | MaximIC | Low-cost, +5V, serial-input, voltage-output, 16-bit DAC. |
| OP27GZ | MaximIC | Low-noise precision operational amplifier. 8MHz gain-bandwidth product. 2.8V/micros slew rate |
| MAX532AEWE | MaximIC | Dual, serial-input, voltage-output, 12-bit MDAC. Error (LSB) +-1/2 |
| DG442CJ | MaximIC | Improved, quad, SPST analog switch |
| MAX328MJE | MaximIC | Ultra-low lealage monolithic CMOS analog multiplexer. |
| MAX4601EAE | MaximIC | Low on-resistance (2.5om max), quad, SPST, CMOS analog switches (four NC switches). |
| MAX873ACSA | MaximIC | Low-power, low-drift precision voltage reference. 2.5V+-1.5mV output (Ta=25gradC). TEMPCO(max) 7ppm/gradC. |
| MAX5154ACEE | MaximIC | Low-power, dual, 12-bit voltage-output DAC with serial interface. +5V single-supply operation. INL(LSB) +-1/2. |
| MAX2633EUK-T | MaximIC | VHF-to-microwave, +3V, general-purpose amplifier |
| MAX737MJD | MaximIC | -15V, inverting carrent-mode PWM regulator. |
| MAX6303CSA | MaximIC | +5V, low-power microprocessor supervisory circuit with adjustable reset/watchdog (active-low reset, push/pull reset output. |
| MAX4537CPE | MaximIC | Quad, low-voltage, SPST analog switches with enable. 4 NC. |
| MAX6322HPUK28A-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 1ms |
| MAX505BEAG | MaximIC | Quad 8-bit DAC with Rail-to-Rail voltage outputs. Double-buffered logic inputs. TUE +-3/2 LSB. |
| MAX6307UK44D2-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds4.270(min),4.490(max).Nominal timeout period 20ms. |
| MAX4521ESE | MaximIC | Quad, low-voltage, SPST analog switch. |
| MX7672UQ10 | MaximIC | High-speed 12-bit A/D converter with external reference input. Fast conversion time 10 microsec. Linearity +-3/4 LSB. |
| MAX6312UK45D3-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 4.388(min) 4.613(max). Nominal timeout period 140ms. |
| MAX162CC/D | MaximIC | Complete high-speed CMOS 12-bit ADC. Error(LSB) +-1. |
| MAX4527ESA | MaximIC | Phase-reversal analog switch. |
| MAX551AEPA | MaximIC | +5V, 12-bit, serial, multiplying DAC. Linearity(LSB) +-1/2. |
| MAX6317HUK35DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.500V, min reset timeout 1.12sec, typ watchdog timeout 25.6sec |
| MAX796ESE | MaximIC | Step-down controller with synchronous rectifier for CPU power. 3.3V/5V or adjustable main output. Regulates positive secondary voltage (such as +12V) |
| MAX209CWG | MaximIC | +5V RS-232 transceiver with 0.1 microF external capacitors |
| MAX4074AOEUK-T | MaximIC | Micropower, Rail-to-Rail, fixed-gain, single, GainAmp op amp. Inverting gain 9V/V, noniverting gain 10V/V, -3dB BW 90kHZ. |
| MAX6319MHUK35B-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 20ms |
