| Del nr | Tillverkare | Ansökan |
|---|
| MXD1000PA75 | MaximIC | 5-tap silicon delay line |
| MAX6320PUK39DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.900V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX1488EESD | MaximIC | +,-15kV ESD-protected, quad, low-power RS-232 line driver |
| MAX3185EAP | MaximIC | +-15kV ESD-protected, EMC-compliant, 230kbps RS-232 serial port for motherboards/desktop PSs. |
| MAX6334UR17D3-T | MaximIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 1.7V, reset timeout(min) 100ms. |
| MAX6318LHUK30CY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.000V min, reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX6337US23D1-T | MaximIC | Ultra-low-voltage, low-power microprocessor circuit with manual reset (reset output active-low, open-drain) . Reset threshold(typ) 2.3V, reset timeout(min) 1ms. |
| MAX6321HPUK34AY-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
| MAX4175AHEUK-T | MaximIC | Single, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 2.5, 1+ (Rf/Dg) noninverting gain 3.5, -3dB BW 820kHz. |
| MAX6307UK27D1-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds2.633(min),2.768(max).Nominal timeout period 1ms. |
| MAX6316MUK27CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.700V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| MAX5355CUA | MaximIC | 10-bit voltage-output DAC. +3.3V single supply operation. |
| MX7534KEWP | MaximIC | Microprocessor-compatible, 14-bit DAC. INL +-1 LSB. |
| MAX4527EUA | MaximIC | Phase-reversal analog switch. |
| MXD1013SA200 | MaximIC | 3-in-1 silicon delay line. Output delay 200ns. |
| MAX1240CESA | MaximIC | +2.7V, low-power, 12-bit serial ADCs in 8-pin SO. INL (LSB) +1 |
| MAX271EWG | MaximIC | Digitally-programmed, dual 2nd-order continuous lowpass filter. |
| MAX6317HUK33BZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.300V, min reset timeout 20ms, typ watchdog timeout 25.6sec |
| MAX250CPD | MaximIC | +5V powered isolated RS-232 driver/receiver. |
| MAX6305UK00D4-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, 2 additional undervoltage reset inputs). Nominal timeout period 200ms. |
| MAX636BCSA | MaximIC | Preset -12V output or adjuistable output with 2 resistors, CMOS switching regulator. Output accuracy 10%. |
| MAX6318LHUK36CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.600V min, reset timeout 140ms,typ watchdog timeout 25.6sec |
| IH5048ACWE | MaximIC | CMOS analog switch. |
| DG304ABA | MaximIC | CMOS dual and quad analog switch. |
| MAX795SCPA | MaximIC | Microprocessor supervisory circuit. Reset threshold 2.85V to 3.00V. Active-low reset. Backup-battery switchover. External switch driver. Chip-enable gating. |
| MAX813LC/D | MaximIC | Low-cost, microprocessor supervisory circuit. Active-low manual-reset input. Active-high reset output. Precision supply-voltage monitor 4.65V. |
| MAX1680ESA | MaximIC | 125 mA, frequency-selectable, switched-capacitor voltage converter. |
| HI1-0201-2 | MaximIC | Quad SPST CMOS analog switch |
| MAX6321HPUK41CW-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.100V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX6317HUK36BY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.600V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
