| Del nr | Tillverkare | Ansökan |
|---|
| MAX6317HUK38DY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.800V, min reset timeout 1.12sec, typ watchdog timeout 1.6sec |
| MAX6315US38D2-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 3.80V. Reset timeout period(min) 20ms. |
| MAX6379UR39-T | MaximIC | Ultra-low-power voltage detector, 3.9V |
| MAX707C/D | MaximIC | Low-cost, microprocessor supervisory circuit. Active-high reset output. Precision supply-voltage monitor 4.65V. |
| MAX799C/D | MaximIC | Step-down controller with synchronous rectifier for CPU power. 3.3V/5V or adjustable main output. Regulates negative secondary voltage (such as -5V). |
| MAX851C/D | MaximIC | Low-noise, regulated, negative charge-pump power supplies for GaAsFET bias. 2mVp-p output voltage ripple. 100kHz chage-pump switching frequency. |
| MAX6334UR20D3-T | MaximIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 2.0V, reset timeout(min) 100ms. Standard version |
| MAX473ESA | MaximIC | Single, 10MHz single-supply op amp. |
| MAX6310UK42D2-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 4.095(min),4.305(max). Nominal timeout period 20ms. |
| MAX4100EUA | MaximIC | 500MHz unity-gain bandwidth, low-power op amp. |
| MX7548BQ | MaximIC | CMOS 8-bit microprocessor compatible 12-bit DAC. Linearity +-1/2 LSB. |
| MAX319ESA | MaximIC | Precision, CMOS analog switch |
| MAX6321HPUK35CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 140ms, watchdog timeout(typ) 25.6sec |
| MAX6317HUK29CY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 2.930V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MX7542TQ | MaximIC | CMOS microprocessor-compatible 12 bit DAC. Error +1/2 LSB. |
| MAX6309UK30D2-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 2.925(min),3.075(max) Nominal timeout period 20ms. |
| MAX4593CSE | MaximIC | High-speed, single-supply 12V, quad, SPST analog switches (two NO and two NC switches). |
| MAX6316LUK41BY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.100V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX127AEAI | MaximIC | Multirange, +5V, 12-bit DAS with 2-wire serial interface. INL(LSB) +1/2,-1/2 |
| MAX4503CPA | MaximIC | Low-voltage, dual-supply, SPST, CMOS analog switch. |
| MAX532BCPE | MaximIC | Dual, serial-input, voltage-output, 12-bit MDAC. Error (LSB) +-1 |
| DG381ACJ | MaximIC | General purpose CMOS quad analog switch. |
| MAX4506C/D | MaximIC | Fault-protected, high-voltage, signal-line protector |
| MAX5251BMJP | MaximIC | +3V, quad, 10-bit, voltage-output DAC with serial interface. INL(LSB) +-2. |
| MAX6317HUK31CY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.080V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX464CWI | MaximIC | Two-channel, quad RGB switch and buffer. Voltage gain 1V/V. |
| MAX6318MHUK49BZ-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.900V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec |
| MAX6322HPUK49A-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.900V, reset timeout(min) 1ms |
| MAX6318MHUK39DX-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.900V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| IH5142CPE | MaximIC | Low power fast CMOS analog switch. Single pole, doube throw (SPDT). |
