| Del nr | Tillverkare | Ansökan |
|---|
| MAX4173TEUT-T | MaximIC | Low-cost,voltage-output, high-side current-sense amplifier. Gain 20V/V. |
| MAX358CWE | MaximIC | Fault-protected analog 8 channel single-ended (1 of 8) multiplexer. |
| MAX4663CAE | MaximIC | 2.5om, quad, SWPST, CMOS analog switch (two NC and two NO switches). |
| MX7820KN | MaximIC | CMOS highspeed 8-bit A/D converter with reference and track/hold function. Error +,-1 LSB |
| MAX6310UK26D4-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 2.564(min),2.696(max). Nominal timeout period 1120ms. |
| DG441AK | MaximIC | Improved, quad, SPST analog switch |
| MAX6316LUK48BY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.800V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX781CBX | MaximIC | PDA/hand-held computer power controller. |
| MAX6378XR45-T | MaximIC | Ultra-low-power voltage detector, 4.5V |
| MAX225CWI | MaximIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX6320PUK27AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.700V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| MAX4473ESA | MaximIC | Low-cost, low-voltage, PA power control amplifier for GSM applications. |
| MAX6321HPUK48BW-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| DG387AA | MaximIC | General purpose CMOS quad analog switch. |
| MX7533AD | MaximIC | CMOS low-cost 10 bit multiplying D/A converter. Error 0.2% |
| MAX6321HPUK34CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 140ms, watchdog timeout(typ) 25.6sec |
| MAX6320PUK29DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.930V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX218CPP | MaximIC | 1.8V to 4.25V - powered, true RS-232 dual transceiver. |
| MAX4541CPA | MaximIC | Low-voltage, single-supply dual SPST analog switch. |
| MAX3676EHJ | MaximIC | 622Mbps, 3.3V clock-recovery and data-remiting IC with limiting amplifier. 5mm TQFP. |
| MAX6317HUK35CW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.500V, min reset timeout 140ms, typ watchdog timeout 6.3ms |
| MAX6308UK00D1-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,2 additional undervoltage reset inputs). Nominal timeout period 1ms. |
| MAX551ACPA | MaximIC | +5V, 12-bit, serial, multiplying DAC. Linearity(LSB) +-1/2. |
| MAX6318MHUK48CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 140ms, watchdog timeout(typ) 25.6sec |
| MAX4051C/D | MaximIC | Low-voltage, CMOS analog multiplexer |
| MAX552AEUB | MaximIC | +3V, 12-bit, serial, multiplying DAC. Linearity(LSB) +-1/2. |
| MX7574KN | MaximIC | Microprocessor compatible 8-bit A/D converter. Fast conversion time 15microsec. Error +-1/2 LSB. |
| MAX121C/D | MaximIC | 308ksps ADC with DSP interface and 78dB SINAD |
| MAX6316LUK39BY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.900V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX6321HPUK34DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
