| Del nr | Tillverkare | Ansökan |
|---|
| MAX6309UK30D1-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 2.925(min),3.075(max) Nominal timeout period 1ms. |
| MAX520BCWE | MaximIC | Quad, 2-wire serial 8-bit DAC with Rail-to-Rail, unbuffered outputs. TUE(LSB) 2. |
| MAX792MMJE | MaximIC | Microprocessor and non-volatile metory supervisory circuit. Reset threshold 4.37V |
| MAX875AESA | MaximIC | Low-power, low-drift precision voltage reference. 5V+-2.0mV output (Ta=25gradC). TEMPCO(max) 7ppm/gradC. |
| MAX6318MHUK29DW-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.930V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MXL1179S | MaximIC | 17microA max, quad, single-supply precision operational amplifier. |
| MAX4005CSA | MaximIC | 950MHz FET-input buffer with 75om output |
| MAX4142ESD | MaximIC | 250MHz, low-power, high-output-current, differential line driver. |
| MAX492EPA | MaximIC | Dual, micropower, single-supply operation (+2.7V to +6V), Rail-to-Rail op amp. |
| MAX1249AEEE | MaximIC | +2.7V to 5.25V, low-power, 4-channel, serial 10-bit ADC. INL (LSB) +1/2,-1/2 |
| MAX6319LHUK46D-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 1120ms |
| MAX810ZEUR-T | MaximIC | Microprocessor reset circuit. Reset threshold 2.32V. Push-pull active-high reset. 2.5k increments. |
| MAX487ESA | MaximIC | Low-power, slew-rate-limited RS-485/RS-422 transceiver. Half-duplex. Data rate 0.25Mbps. Slew-rate limited - yes. Low-power shutdown - yes. Receiver/driver enable - yes. Quiescent current - 120 microA. Number of transmitter on bus - 128. |
| MAX9698CPE | MaximIC | Single very fast TTL output comparator |
| DG200ADY | MaximIC | Dual monolithic SPST CMOS analog swith |
| MAX6332UR22D3-T | MaximIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 2.2V, reset timeout(min) 100ms. Standard version |
| MAX805RC/D | MaximIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.625V. Active-high reset. Watchdog input. Backup-battery switch. Power-fail threshold accuracy +-4%. Power-fail comparator. Reset window +-75mV |
| MAX234CWE | MaximIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX6326XR24-T | MaximIC | Ultra-low-power microprocessor supervisory circuit (reset output active-low, push-pull). Reset threshold (typ) 2.400V. Order increment 10k |
| MAX765CSA | MaximIC | -12V or adjustable output from -1V to -16V, high-efficiency, low IQ DC-DC inverter |
| MAX463EWG | MaximIC | Two-channel, triple RGB switch and buffer. Voltage gain 1V/V. |
| MAX632BESA | MaximIC | CMOS fixed +12V output voltage, adjustable output with 2 resistors step-up switching regulator. 10% output accuracy. |
| MAX6318MHUK48DY-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX6347XR40-T | MaximIC | Microprocessor supervisory circuit (reset output active-high, push-pull). Reset threshold (typ) 4.000V. Order increment 10k |
| MAX6318MHUK25CY-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.500V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX4284ESD | MaximIC | Quad, open-loop, unity-gain stable amplifier |
| MAX3235EEPP | MaximIC | +-15kV ESD-protected, 1microA, 250kbps, 5.0V, dual RS-232 with internal capacitor. |
| MAX794CPE | MaximIC | Microprocessor supervisory circuit. Reset threshold programmable. Active-low reset.Active-high reset.Low-line early warning output.Backup-battery switchover.External switch driver.Power-fail comparator.Watchdog input.Manual reset inp. |
| MAX6318LHUK33AW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.300V min, reset timeout 1ms, typ watchdog timeout 6.3ms |
| MXD1013UA060 | MaximIC | 3-in-1 silicon delay line. Output delay 60ns. |
