| Del nr | Tillverkare | Ansökan |
|---|
| MF10CC/D | MaximIC | Dual universal switched capacitor filter. |
| MAX759MJD | MaximIC | Adjustable, inverting carrent-mode PWM regulator. |
| MAX4075ALESA | MaximIC | Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp op amp. Inverting gain 5V/V, noninverting gain 6V/V, -3dB BW 71kHz. |
| MAX875ACSA | MaximIC | Low-power, low-drift precision voltage reference. 5V+-2.0mV output (Ta=25gradC). TEMPCO(max) 7ppm/gradC. |
| MAX6306UK47D1-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 4.583(min),4.818(max) Nominal timeout period 1ms. |
| MAX3241EEAI | MaximIC | +-15kV ESD-protected, down to 10nA, 3.0V to5.5V, up to 1Mbps, true RS-232 transceiver. |
| MAX6326UR24-T | MaximIC | Ultra-low-power microprocessor supervisory circuit (reset output active-low, push-pull). Reset threshold (typ) 2.400V. Order increment 10k |
| MAX159BEPA | MaximIC | +2.7V, low-power, 2-channel, 108ksps, serial 10-bit ADC in 8-pin microMAX. INL (LSB) +,- 1 |
| MAX6316MUK39CY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.900V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX736C/D | MaximIC | -12V, inverting carrent-mode PWM regulator. |
| DG302CK | MaximIC | Dual, TTL compatible CMOS analog switch. |
| MAX6318MHUK27DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.700V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
| MXL1074CT | MaximIC | 5A step-down, PWM, switch-mode DC-DC regulator. Adjustable output 2.5V to 35V |
| MAX6316MUK26AY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.630V, min reset timeout 1ms, typ watchdog timeout 1.6sec |
| MAX174BC/D | MaximIC | Industry standard complete 12-bit A/D converter. 8 microsec. max conversion time. Linearity (LSBs) 1/2. |
| MAX6321HPUK50AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 5.000V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| MAX704TMJA | MaximIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 3.075V. Active-low reset. Manual reset input. Backup-battery switch. Power-fail threshold accuracy +-4%. Power-fail comparator. Reset window +-75mV |
| MAX4175ANEUK-T | MaximIC | Single, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 8, 1+ (Rf/Dg) noninverting gain 9, -3dB BW 480kHz. |
| MAX6192CESA | MaximIC | Precision, micropower, low-dropout voltage reference. Output voltage 2.500V, initial accuracy +-10, temperature coefficient <25ppm. |
| MAX3762E/D | MaximIC | Low-power, 622Mbps limiting amplifier with chatter-free power detect for LANs. |
| MX7531LN | MaximIC | CMOS 12 bit multiplying D/A converter. Error 0.05% |
| MAX6502UKP095-T | MaximIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage push-pull. Standard temperature threshold(C) +95. |
| MAX5140IPG | MaximIC | 8-bit, ultra-high-speed DAC |
| MXD1005SE75 | MaximIC | 5-tap silicon delay line |
| MAX649C/D | MaximIC | 5V or adjustable, high-efficiency, current-limited control scheme, step-down DC-DC controller. |
| MAX6318LHUK47DY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input, reset output active-low, push/pull; active-high,push/pull).Factory-trimmed reset threshold (typ) 4.700V, min reset timeout 1.12sec, typ watchdog timeout 1.6sec |
| MAX260BMRG | MaximIC | Microprocessor programmable universal active filter. Accuracy 2%. |
| MAX6320PUK38DW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.800V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX4162ESA | MaximIC | Micropower, single-supply operation at 3V to 5V, Rail-to-Rail I/O op amp. 200kHz gain-bandwidth product. |
| MAX1489ECPD | MaximIC | +,-15kV ESD-protected, quad, low-power RS-232 line driver |
